Universal 4130 |
||
| Specification: | ||
| AISI 4130 | ||
| Description: | Universal 4130 is a heat treatable low alloy steel for the welding of SAE 4100 series steels. Some of these steels, the higher carbon grades, will require a preheat of 300 to 350 degrees F. The lower carbon grades are easily welded without preheat unless the preheat is required to develop specific physical properties. | |
| Chemical Analysis: | ||
| Element: | Composition: | |
| C | 0.31 | |
| Cr | 0.93 | |
| Mn | 0.52 | |
| Mo | 0.20 | |
| P | 0.012 | |
| S | 0.023 | |
| Si | 0.028 | |
| Diameters & Lengths: | ||
| Cut length Diameters: | .045, 1/16, 3/32, 1/8 | |
| Coils: | 1/16, 3/32, 1/8 | |
| Spools 2lbs: | .062, .045, .035 | |
| Spools 10lbs: | .035, .045, .062 | |
| Spools 25lbs: | .035, .045, .062 | |
| Wire Cut Length: | 18 in, 36 in, Custom Length | |
| Special sizes and forms are available on request. Flag tagging is available on one end or both of cut lengths. |
||
 |
|
 |
MSDS PDF |