Universal 110-S1 |
||
| Specifications: | ||
| AWS A5.28 | ||
| Class ER110-S1 | ||
| Description: | Universal 110-S1 deposits are high strength, very tough and used in critical applications. This alloy was originally developed for welding HY80 and HY100 steels for military applications. Alloy 110-S1 is also used for a variety of structural applications where tensile strength requirements exceed 100 ksi and excellent toughness is required to temperatures as low as -60 F. Mechanical properties obtained from weld deposits made with this alloy will vary depending on the heat input used. | |
| Mechanical Properties: | ||
| Elongation: | 15% | |
| Tensile Strength (psi): | 115,000 | |
| Yield Strength (psi): | 98,000 | |
| Chemical Analysis: | ||
| Element: | Composition: | |
| C | 0.07 | |
| Cr | 0.40 | |
| Mn | 1.60 | |
| Mo | 0.50 | |
| Ni | 2.30 | |
| P | 0.007 | |
| S | 0.009 | |
| Si | 0.45 | |
| Diameters & Lengths: | ||
| Cut length Diameters: | 1/8, 3/32, 1/16 | |
| Spool Diameters: | .045, .035 | |
| Sub Arc: | 3/32, 1/8 | |
| Wire Cut Length: | 18 in, 36 in, Custom Length | |
| Special sizes and forms are available on request. Flag tagging is available on one end or both of cut lengths. |
||
| Charpy V Notch Impact Values: | ||
| -60 Degress F: | 65 ft. lbs. | |
 |
|
 |
MSDS PDF |