Alloy B3 ENiMo-10 |
||
| Specifications: | ||
| AWS A5.11 | ||
| Class ENiMo-10 | ||
| Description: | Alloy B2 is a nickel molybdenum alloy designed for severe corrosion applications in hydrochloric acid at all concentrations and temperatures including the boiling point. This alloy is also resistant to hydrogen chloride gas, sulfuric, acetic, and phosphoric acids. This alloy resists the formation of grain-boundary carbide parcipitates in the weld heat affected zone, thus making the it suitable for most chemical process applications in the as welded condition. Alloy B2 also has excellent resistance to pitting and stress corrosion cracking. | |
| Mechanical Properties: | ||
| Elongation: | 40% | |
| Tensile Strength (psi): | 110,000 | |
| Chemical Analysis: | ||
| Element: | Composition: | |
| C | 0.02max | |
| Co | 1.0 max | |
| Cr | 1.0 max | |
| Fe | 2.0 max | |
| Mn | 1.0 max | |
| Mo | 26-30 | |
| Ni | Balance | |
| P | 0.04 max | |
| S | 0.03 max | |
| Si | 0.10 max | |
| Diameters & Lengths: | ||
| Coated Electrodes: | 3/32, 1/8, 5/32, 3/16 | |
| Wire Cut Length: | 18 in, 36 in, Custom Length | |
| Special sizes and forms are available on request. Flag tagging is available on one end or both of cut lengths. |
||
 |
|
 |
MSDS PDF |