PHOS BRONZE C ELECTRODE |
||
| Specification: | ||
| AWS A5.6 ECuSn-C | ||
| Description: | Universal Phos-Bronze C is an all position Phos-Bronze electrode used for joining copper base alloys to themselves and to stainless steels and cast irons. It is excellent for overlays on pumps, shafts, impellers and propeller blades. Universal Phos-Bronze C is used for building up bearing journals and frictional wear surfaces on heavier sections, galvanized iron, and ornamental iron. It provides a good color match on bronze and will work harden. Weld deposits are ductile, strong, and machinable. It offers corrosion resistance to salt water and chemicals. Remove all surface contamination from the weld area. Maintain a short arc gap and fill in craters prior to extinguishing the arc. | |
| Mechanical Properties: | ||
| Brinnell Hardness: | 105 | |
| Elongation: | 18% | |
| Tensile Strength (psi): | 50,000 psi, min. (340 N/mm2) | |
| Yield Strength (psi): | 30,000 psi, min. (210 N/mm2) | |
| Chemical Analysis: | ||
| Element: | Composition: | |
| 0.50 max | ||
| Al | 0.001 max | |
| Cu | Bal | |
| Fe | 0.10 max | |
| Mn | 0.01 max | |
| Ni | 0.05 max | |
| P | 0.01 max | |
| Si | 0.05 max | |
| Sn | 8.00 max | |
| Diameters & Lengths: | ||
| Coated Electrodes: | 3/32,1/8,5 | |
| Wire Cut Length: | 18 in, 36 in, Custom Length | |
| Special sizes and forms are available on request. Flag tagging is available on one end or both of cut lengths. |
||
 |
|
 |
MSDS PDF |