AMS 6462 |
||
| Description: | Alloy 6130 is primarily used with the gas tungsten arc, gas metal arc and submerged arc welding processes. This low-alloy filler metal is designed to weld low-alloy steels capable of heat treatment of 150,000 psi tensile strength. | |
| Chemical Analysis: | ||
| Element: | Composition: | |
| C | 0.30 | |
| Cr | 1.0 | |
| Cu | 0.35 max | |
| Fe | Balance | |
| Mn | 0.80 | |
| Mo | 0.06 max | |
| Ni | 0.25 max | |
| P | 0.025 max | |
| S | 0.025 max | |
| Si | 0.25 | |
| V | 0.20 | |
| Diameters & Lengths: | ||
| Cut length Diameters: | .020, .025, .035, .035, .040, .045, 1/16, 3/32, 1/8 | |
| Spool Diameters: | .020, .025, .030, .035, .040, .045, 1/16, 3/32, 1/8 | |
| Wire Cut Length: | 18 in, 36 in, Custom Length | |
| Special sizes and forms are available on request. Flag tagging is available on one end or both of cut lengths. |
||
 |
|
 |
MSDS PDF |