AMS 5832 |
||
| Description: | Inconel Filler Metal 718 is recommended for gas tungsten arc and gas metal arc welding of alloy 718, 706 and X-750. This double gamma prime alloy has excellent strength, good ductility up to 1300 degrees F, good formability and weld ability. It also possesses excellent cryogenic properties which accounts for its varied application. Uses for this alloy are mainly welding aircraft high strength components and liquid rocket components involving cryogenic temperatures. | |
| Mechanical Properties: | ||
| Tensile Strength (psi): | 165,000 (age hardened) | |
| Yield Strength (psi): | 135,000 | |
| Chemical Analysis: | ||
| Element: | Composition: | |
| Al | 0.5 | |
| B | 0.004 | |
| C | 0.05 | |
| CbTa | 1.25 max | |
| Co | 1.0 max | |
| Cr | 18.0 | |
| Cu | 0.30 max | |
| Fe | 19.0 | |
| Mn | 0.35 max | |
| Mo | 3.0 | |
| Ni | 53.0 | |
| Rem | 0.40 max | |
| Ti | 0.9 | |
| W | - | |
| Diameters & Lengths: | ||
| Cut length Diameters: | .020, .025, .030, .035, .040, .045, 1/16, 3/32, 1/8 | |
| Spool Diameters: | .020, .025, .030, .035, .040, .045, 1/16, 3/32, 1/8 | |
| Wire Cut Length: | 18 in, 36 in, Custom Length | |
| Special sizes and forms are available on request. Flag tagging is available on one end or both of cut lengths. |
||
 |
|
 |
MSDS PDF |