AMS 5828 |
||
| Description: | Waspalloy Filler Metal is used to weld base metals of similar composition using the gas tungsten arc, gas metal arc and resistance welding processes. Waspalloy is generally used for critical applications requiring strength at elevated temperatures (1600 degrees F). This alloy has good corrosion and oxidation resistance in gas turbine atmospheres and is recommended for turbine blades, shafts, turbine and compressor disc, spacers, fasteners and miscellaneous jet engine hardware. Waspalloy is suitable n replacing Nimonc 90 alloy in selected applications. | |
| Chemical Analysis: | ||
| Element: | Composition: | |
| Al | 1.5 | |
| B | 0.006 | |
| C | 0.08 | |
| Co | 14.0 | |
| Cr | 19.0 | |
| Cu | 0.10 max | |
| Fe | 2.0 max | |
| Mn | 0.10 max | |
| Mo | 4.0 | |
| Ni | Balance | |
| P | 0.01 max | |
| S | 0.01 max | |
| Si | 0.10 max | |
| Ti | 3.0 | |
| Zr | 0.04 max | |
| Diameters & Lengths: | ||
| Cut length Diameters: | .020, .025, .030, .035, .040, .045, 1/16, 3/32, 1/8 | |
| Spool Diameters: | .020, .025, .030, .035, .040, .045, 1/16, 3/32, 1/8 | |
| Wire Cut Length: | 18 in, 36 in, Custom Length | |
| Special sizes and forms are available on request. Flag tagging is available on one end or both of cut lengths. |
||
 |
|
 |
MSDS PDF |