AMS 5800 |
||
| Description: | Rene 41 can be welded with the gas tungsten arc and gas metal arc processes. Because of its high strength and good oxidation resistance, this alloy is recommended for jet and rocket engine components such as turbine wheels, turbine blades, torque rings, afterburner parts, combustion chambers liners, structural hardware and various airframe and missile components. | |
| Chemical Analysis: | ||
| Element: | Composition: | |
| Al | 1.5 | |
| B | 0.006 | |
| C | 0.12 max | |
| Co | 11.0 | |
| Cr | 19.0 | |
| Fe | 5.0 max | |
| Mn | 0.10 | |
| Mo | 10.0 | |
| Ni | Balance | |
| Rem | 0.02 max | |
| Si | 0.50 | |
| Ti | 3.0 | |
| W | - | |
| Diameters & Lengths: | ||
| Cut length Diameters: | .020, .025, .030, .035, .040, .045, 1/16, 3/32, 1/8 | |
| Spool Diameters: | .020, .025, .030, .035, .040, .045, 1/16, 3/32, 1/8 | |
| Wire Cut Length: | 18 in, 36 in, Custom Length | |
| Special sizes and forms are available on request. Flag tagging is available on one end or both of cut lengths. |
||
 |
|
 |
MSDS PDF |