AMS 5794 |
||
| Description: | Multimet Alloy (N-155) can be welded using the gas tungsten arc and gas metal arc welding processes. Alloy N-155 has moderate resistance to stress up to 2000 degrees F and excellent resistance to stress up to 1500 degrees F. This alloy gains wide acceptance in th aircraft industry welding jet engine parts such as tailpipes, tail cones, afterburner parts, exhaust manifolds, turbine blades, buckets, nozzles and combustion chambers. | |
| Chemical Analysis: | ||
| Element: | Composition: | |
| C | 0.10 max | |
| CbTa | 1.25 max | |
| Co | 20.0 | |
| Cr | 21.5 | |
| Fe | Balance | |
| Mn | 1.5 | |
| Mo | 3.0 | |
| N | 0.20 max | |
| Ni | 20.0 | |
| P | 0.04 max | |
| S | 0.03 max | |
| Si | 1.0 max | |
| W | 2.5 | |
| Diameters & Lengths: | ||
| Cut length Diameters: | .020, .025, .030, .035, .040, .045, 1/16, 3/32, 1/8 | |
| Spool Diameters: | .020, .025, .030, .035, .040, .045, 1/16, 3/32, 1/8 | |
| Wire Cut Length: | 18 in, 36 in, Custom Length | |
| Special sizes and forms are available on request. Flag tagging is available on one end or both of cut lengths. |
||
 |
|
 |
MSDS PDF |