AMS 5778 |
||
| Description: | Inconel Filler Metal 69 is used for gas tungsten arc and gas metal arc welding of Inconel Alloy 722 and Inconel X-750. Typical applications for filler metal 69 include gas turbine and aircraft parts such as turbine blades, vanes, discs and springs. | |
| Mechanical Properties: | ||
| Age Hardening: | 1950 degreesF/2 hr., A.C. 1300 degreesF/20 hr., A.C. | |
| Elongation: | 5% | |
| Tensile Strength (psi): | 125,000 | |
| Yield Strength (psi): | 90,000 | |
| Chemical Analysis: | ||
| Element: | Composition: | |
| Al | 0.40 | |
| C | 0.08 max | |
| CbTa | 1.0 | |
| Cr | 15.5 | |
| Cu | 0.50 max | |
| Fe | 7.0 | |
| Mn | 1.0 max | |
| Ni | 72.0 | |
| P | 0.03 max | |
| Rem | 0.50 max | |
| S | 0.015 max | |
| Si | 0.50 max | |
| Ti | 2.4 | |
| Diameters & Lengths: | ||
| Cut length Diameters: | .020, .025, .030, .035, .040, .045, 1/16, 3/32, 1/8 | |
| Spool Diameters: | .020, .025, .030, .035, .040, .045, 1/16, 3/32, 1/8 | |
| Wire Cut Length: | 18 in, 36 in, Custom Length | |
| Special sizes and forms are available on request. Flag tagging is available on one end or both of cut lengths. |
||
 |
|
 |
MSDS PDF |