AMS 5687 |
||
| Description: | Alloy 600 is recommended when good oxidation and corrosion resistance at elevated temperatures are required. This alloy is used extensively in aircraft engines and primarily in exhaust equipment. | |
| Chemical Analysis: | ||
| Element: | Composition: | |
| C | 0.10 max | |
| Cr | 15.5 | |
| Cu | 0.50 max | |
| Fe | 8.0 | |
| Mn | 1.0 max | |
| Ni | 75.0 | |
| P | - | |
| Rem | .050 max | |
| S | 0.015 max | |
| Si | 0.50 max | |
| Diameters & Lengths: | ||
| Cut length Diameters: | .020, .025, .030, .035, .040, .045, 1/16, 3/32, 1/8 | |
| Spool Diameters: | .020, .025, .030, .035, .040, .045, 1/16, 3/32, 1/8 | |
| Wire Cut Length: | 18 in, 36 in, Custom Length | |
| Special sizes and forms are available on request. Flag tagging is available on one end or both of cut lengths. |
||
 |
|
 |
MSDS PDF |