AMS 5660 |
||
| Description: | Alloy 901 is a corrosion and heat resistant nickel-base alloy designed for gas tungsten arc and gas metal arc welding. Alloy 901 is used primarily for parts such as turbine rotors, shafts and buckets or blades requiring high strength up to 1400 degrees F (760 degrees C) and oxidation resistance up to 1600 degrees F (871 degrees C). | |
| Mechanical Properties: | ||
| Elongation: | 12% | |
| Tensile Strength (psi): | 150,000 | |
| Yield Strength (psi): | 100,000 | |
| Chemical Analysis: | ||
| Element: | Composition: | |
| Al | 0.35 max | |
| B | 0.02 max | |
| C | 0.10 max | |
| Cr | 13.0 | |
| Cu | 0.50 max | |
| Fe | Balance | |
| Mn | 1.0 max | |
| Mo | 6.0 | |
| Ni | 43.0 | |
| P | 0.03 max | |
| S | 0.03 max | |
| Si | 0.60 max | |
| Ti | 3.0 | |
| Diameters & Lengths: | ||
| Cut length Diameters: | .020, .025, .030, .035, .040, .045, 1/16, 3/32, 1/8 | |
| Spool Diameters: | .020, .025, .030, .035, .040, .045, 1/16, 3/32, 1/8 | |
| Wire Cut Length: | 18 in, 36 in, Custom Length | |
| Special sizes and forms are available on request. Flag tagging is available on one end or both of cut lengths. |
||
 |
|
 |
MSDS PDF |