AMS 4191 |
||
| Description: | Alloy 2319 is used on applications requiring good strength at high temperatures (600 degrees F) and many cryogenic and aircraft parts. Primarily used where weld joints are capable of being heat treated to high strength. | |
| Mechanical Properties: | ||
| Elongation: | 10% | |
| Tensile Strength (psi): | 69,000 | |
| Yield Strength (psi): | 57,000 | |
| Chemical Analysis: | ||
| Element: | Composition: | |
| Al | Balance | |
| Cr | - | |
| Cu | 6.3 | |
| Fe | 0.30 max | |
| Mg | 0.02 max | |
| Mn | 0.30 | |
| Rem | 0.15 max | |
| Si | 0.20 max | |
| Ti | 0.15 | |
| V | 0.10 | |
| Zn | 0.10 max | |
| Zr | 0.15 | |
| Diameters & Lengths: | ||
| Cut length Diameters: | .020, .025, .030, .035, .040, .045, 1/16, 3/32, 1/8 | |
| Spool Diameters: | .020, .025, .030, .035, .040, .045, 1/16, 3/32, 1/8 | |
| Wire Cut Length: | 18 in, 36 in, Custom Length | |
| Special sizes and forms are available on request. Flag tagging is available on one end or both of cut lengths. |
||
 |
|
 |
MSDS PDF |